Following the 9 steps as below, you can easy to use BMW ICOM A2 D-link USB WIFI adapter:
1.Plug D-link USB WIFI adapter into the computer via USB port.
2.Only enable ICOM WIFI. Disable computer built-in WIFI or additional wifi source, not plug local network cable or ICOM LAN Cable into wired network port.
3.Start the computer.
4.Open “Network Connections" to confirm the local area network connection is not connected. "D-link DWA-131 Wireless" is ICOM wifi and the X mark is normal, just ignore it.
5.Click "ISPI-NEXT Admin Tools", tick "wifi for ICOM".
6.Plug ICOM A2 into the OBD connector on the car, wait 20 – 60 seconds, you will see the WLAN indicator stop flashing or flash slowly which indicates D-link USB WIFI establish a good communication with ICOM A2 WIFI.
7.Click diagnostic or programming software. Click "OK" when this window pops up.
8.Program ISTA-D, ISTA-P, ISPI, ISSS etc. cannot be closed but be minimized, shown as the following red-circled window.
9.Now ICOM A2 device is recognized working, shown as the following underlined part.
No comments:
Post a Comment